We are introducing to the Paradox wireless product line the SR120. It is the only wireless indoor siren on the market that incorporates a 2–color strobe light with different audio/visual sequences. The SR120 complements the Paradox SR150 outdoor wireless siren when delivering indoor solutions.
The Product
The SR120 wireless indoor siren integrates a piezo siren with white and red LED strobe lights. By triggering an audio-visual signal within the premises as an alarm is detected, this painfully loud wireless siren and flashing light acts as a deterrent preventing burglaries and intrusion events. When a fire alarm is triggered, the SR120 reacts differently, with an intermittent sequence of three beeps with a matching red flash. The different siren and light sequence between the burglar and fire alarms makes for easy audible and visual distinction.
Easy to install with a straightforward wall mount, the SR120 is beautifully designed to complement any indoor setting. Also, with this wireless indoor siren installers no longer have to find a suitable location near a panel from which wires can be passed and hidden.
Features
Compatible with MG Series V4.0 and SP series V4.0 (except SP4000) when using an RTX3 V1.5
Built-in transceiver (433MHz or 868MHz)
Wireless siren (100dB or more) with integrated strobe light
Wireless range in a typical residential environment:
– 35m (115ft) with MG6160, MG6130, and MG6250;
– 70m (230ft) with MG5000, MG5050 and RTX3
Fast alarm response time (within 4 seconds)
2.5 hour alarm display (strobe flashes every 4 seconds after bell cutoff)
Siren presence supervised by control panel
Dual tamper protection (cover removal, and removal from wall)
Assign a total of 4 sirens per control panel (including SR150)
In-field firmware upgradeable via 307USB
Siren test mode
Signal strength/RF transmission and status LED
Fully powered using three 1.5Vdc type “C” alkaline batteries (not included)
Operating temperature: -20°C to 50°C (-4°F to 122°F)
Dimensions: 15.2cm X 4.6cm X 10.9cm (6in X 1.8in X 4.3in)
